Goggle Technology

Reload Magnetic Lens Interchange System

With the reload magnetic lens interchange system, quickly remove lens and replace with a magnetic click.

Outrigger Helmet Compatibility System

Safety shouldn’t be secondary to performance and comfort. Gordini® Outrigger Helmet Compatibility System utilizes hinged outriggers to fit any helmet profile, providing a superior goggle seal, while distributing pressure evenly across the face. The outriggers lay flat when not in use, so you can wear any Helmet Compatible goggle with or without the helmet.

Air Flow Design - AFD®

Gordini® takes the fight against fog seriously— our mission is to deliver the maximum optical experience so you can take your skills further. Our Air Flow Design maximizes air circulation throughout the goggle, using vents in the lens and frame to constantly scoop out moisture, keeping your field of vision dry and fog-free. Hiking the pipe or into the backcountry, or just lapping the lift, AFD® equals uncompromised performance.

Gordini® Venting System - GVS

Fogging happens when there is a lot of humidity in the air. Gordini® Venting System (GVS) keeps the inner lens warm and dry all day long.

Contact Compatible

Over the Glasses - OTG

Memory Face Foam

Features an open cell structure that reacts to body heat and pressure by molding to your unique facial features, helping to relieve pressure points and prevent air gaps. Patent Pending. Over The Glass

Visible Light Transmission (Vlt)

VLT is a measure of the amount of total visible light that will pass through the lens, Different tints offer specific VLT to enhance vision in various light conditions. All Gordini® lens tints protect your eyes from 100% of these harmful forms of solar radiation. All lenses provide 100% protection from harmful UVA and UVB rays.

Lens Tech

Bluebird, greybird, or flat light— every condition presents a different challenge to your vision. Wear a Mirrored lens for glare reduction in direct sunlight, a Gold and Rose tint for increased shadow contrast and depth of field in cloudy, flat light conditions, or a combination of the two for the ultimate in adaptability. Gordini® offers a broad spectrum of lens tints so you can keep riding, no matter what the weather throws at you.


VLT 90% (CAT 0)



VLT 54% (CAT 1)



VLT 49% (CAT 1)


Clear Mirror

VLT 33% (CAT 2)


Grey Gradient

VLT 25% (CAT 2)



VLT 22% (CAT 2)


Gold Mirror

VLT 22% (CAT 2)


Blue Mirror

VLT 14% (CAT 3)


Clear w/ Sliver Flash

VLT 55% (CAT 1)


Yellow w/ Multi-Layer Blue

VLT 63% (CAT 1)


Rose w/ Silver Flash

VLT 46% (CAT 1)


Gold w/ Silver Flash

VLT 47% (CAT 1)


Green w/ Silver Flash

VLT 34% (CAT 2)


Blue w/ Silver Flash

VLT 12% (CAT 3)


Sliver w/ Silver Flash

VLT 12% (CAT 3)


Gold w/ Multi-Layer Orange Mirror

VLT 73% (CAT 1)



AquaBloc® is our proprietary waterproof, windproof, breathable technology. Engineered exclusively for hand wear, our seam-sealed AquaBloc® inserts allow moisture molecules to escape without letting water molecules in. It is the best of both worlds: let your sweaty hands breath while staying warm and dry.

Our waterproof Dri-Max® inserts provide optimal protection in cold and wet conditions.

GORE-TEX® technology keeps water out of our gloves, while allowing moisture from the inside (perspiration) to easily escape. The result is a glove that’s highly breathable and totally waterproof. The microporous structure of the GORE-TEX® membrane is what makes GORE-TEX® products completely waterproof. Each microscopic pore is about 20,000 times smaller than a drop of water, which means no external moisture — from rain to snow — can penetrate the membrane. The pores in the GORE-TEX® membrane are 700 times bigger than a water vapor molecule, so perspiration can easily evaporate through and you can stay dry from the inside out. GORE-TEX® insert. Waterproof, Windproof and Breathable. Guaranteed.

Down Insulation

THINDOWN® brings the insulating advantages of conventional down into a simple, versatile, and streamlined textile. Lightweight, soft and breathable, this innovative cut and sew fabric provides uniform coverage that promises performance. THINDOWN® is an active insulation, helping retain and regulate natural body temperature. Proven to be 2 times warmer than the equivalent down fill and 4 times warmer than polyfill. Available in different weights and sourced solely from traceable and responsible down, RDS or GRS certified. OEKO-Tex certified to meet transparency standards for a more sustainable future for our health and our planet.

Downtek® DownTek™ Water Repellent Down is down that has been treated with water-repellent-nano-treatment. A proprietary application method instead of a bath treatment is used, thereby eliminating waste run-off. Gordini supports the Responsible Down Standard in our use of down.

Synthetic Insulation

PrimaLoft® insulation was originally developed for the U.S. Army as a water-resistant, synthetic alternative to down. Today, the brand is recognized as a benchmark in the outdoor industry for providing unsurpassed comfort in any condition. PrimaLoft, Inc. is active in sustainable textile production through partnerships with the bluesign® system, the International OEKO-TEX® Association, the Sustainable Apparel Coalition’s Higg Index, and the Global Recycled Standard.

Polartec® Thermal Pro advances fleece fashion with new knit structure for the most diverse style options without sacrificing performance. Technical fiber compositions maintain a soft texture and air pockets for thermoregulation and breathability. The adapted look and feel delivers the warmth and comfort of classic fleece. Knit with premium polyester yarns, Thermal Pro is cozy, resilient and stylish.

Megaloft® offers a reliable and durable alternative to down. This synthetic insulation retains its loft minimizing bulk but promising superior, lightweight, warmth. Water-resistant and versatile, Megaloft insulation provides distinct protection and comfort.

Fiber Tech

A patented weave combining the inherent insulating properties of wool with synthetics that wick moisture away from your skin. The warmth of wool with the wicking comfort of fleece.

Revolutionary 3-D Knit technology reduces seams by up to 80%, providing more warmth with less bulk.


Gloves engineered with GORE-TEX INFINIUM™ WINDSTOPPER® product technology offer absolute windproofness while being extremely breathable. The latest enhancements to our GORE-TEX INFINIUM ™ WINDSTOPPER® laminates are designed for exceptional skin comfort.

Additional Glove Technology

GORE-TEX® products, WINDSTOPPER® products: registered trademarks of W.L. Gore & Associates. CLUTCH™ synthetic leather, LavaWool®, Naturaloft®, Megaloft®, Dri-Max®, AquaBloc®, Heatrap®, CLUTCH™ synthetic leather,: registered trademarks of Gordini USA Inc. THINDOWN®: is a product registered trademark of NIPI® ITALIA. Primaloft®: is a registered trademark of Primaloft, Inc. Polartec®: Registered trademark of Malden Mills. Thinsulate™ Insulation, Thinsulate™ Supreme Insulation, Recycled Thinsulate™ are trademarks of 3M Corporation. Copyright © 2015 DownTek. All Rights Reserved.